Yuken PV2R12-12-26-F-RAA-40 Double Vane pump

maximum rpm (oil):6800 rpm; Category:Single Row Ball Bear; UNSPSC:31171504; maximum rpm (grease):5800 rpm; Brand:NTN; Characteristic rolling element frequency, BSF:4.08 Hz; Nlim (grease):5,800 rpm; Dynamic load, C:71.5 kN; ra max:2 mm; bearing material:High Carbon Chrome S;

G1 - Heat Generation Factor (Roller-Raceway):8; Bearing Weight:0.20 Kg; Design Units:Imperial; r - Cup Backface To Clear Radius2:1.27 mm; d:19.050 mm; e - ISO Factor8:0.27; Da - Cup Frontface Backing Diameter:44.50 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:2500 lbf; da - Cone Frontfa

Seals:VV (Non-Contact Rubb; Flange O.D. H(φ):50; Width T(mm):35; Bearing Material:[Steel] Steel; Shape:Flanged Pilot Type; Flange Shape:Square Type; Bearing Part Number:6802; Holder Surface Treatment:Black Oxide Coating; Bearing Used:Deep Groove Ball Bea; Bearing Retained:Yes (with retaining;

Characteristic cage frequency, FTF:0.4 Hz; Characteristic rolling element frequency, BSF:4.97 Hz; da max:37 mm; da min:35 mm; B:16 mm; Dynamic load, C:38.1 kN; db min:40 mm; Min operating temperature, Tmin:-20 °C; r1s min:0.6 mm; Static load, C0:36.1 kN;

rs min:1 mm; Characteristic cage frequency, FTF:0.38 Hz; Nlim (grease):16,000 rpm; f0:13.2; Dynamic load, C:12.8 kN; Radial clearance class:CN; D:47 mm; B:20.6 mm; Characteristic inner ring frequency, BPFI:4.92 Hz; Characteristic rolling element frequency, BSF:4.12 Hz;

Fit:J7; Unit, Type:Insert Bearing Unit; Days to Ship:8 Days; Unit Body Material:Cast Iron; Stroke:No; Unit, Type:Insert Bearing Unit; Unit Body Material:Cast Iron; Grease Type:SH33M; Bearing Unit, Type:Square flange shape; Rolling Element Material:Bearing Steel;

s1:12.5 mm; G1:M16; SW:3 mm; E:21 mm; B:25 mm; L:91 mm; G:R1/8"; C:12.8 kN; C0:6.65 kN; S:7 mm;

Series:32968M; G1 - Heat Generation Factor (Roller-Raceway):2703.6; C - Cup Width:57 mm; Db - Cup Backface Backing Diameter:432.05 mm; e - ISO Factor3:0.44; Cg - Geometry Factor:0.197; D:460 mm; G2 - Heat Generation Factor (Rib-Roller End):309.5; Y - ISO Factor4:1.37; Cup Part Number:Y32968M;

Bearing Retained:Yes (with retaining; Housing Material:304 Stainless Steel; Lateral Width L(mm):76; Number of Bearings:Single; Bearing Part Number:6203; Shape:T-Shaped; Bearing Used:Deep Groove Ball Bea; Bearing Material:Stainless Steel; Width T(mm):19; RoHS:6;

Bearing I.D. d(mm):15; Bearing Retained:Yes (with retaining; Volume Discount:Available; Bearing Material:[Steel] Steel; Type:Bearings with Housin; Volume Discount:Available; RoHS:6; Bearing Used:Deep Groove Ball Bea; Days to Ship:7 Days; Number of Bearings:Double;

Bearing Used:Deep Groove Ball Bea; RoHS:6; Bearing Retained:Yes (with retaining; Volume Discount:Available; Shape:Flange Type; Bearing Part Number:6000; Days to Ship:14 Days; Number of Bearings:Single; Holder Surface Treatment:Electroless Nickel P; Number of Bearings:Single;

T max.:100 °C; J:330 mm; C:143 kN; G:M10x1; Weight:26.3 kg; A:110 mm; Recommended tightening torque for set screw:65.2 Nm; B1:115.9 mm; L:430 mm; Designation of housing:P318-;

Bore Size d:95 mm; C0r - Static Load Rating:41.9 kN; Grease Limiting Speed:3900 rpm; Weight:0.71 Kg; Clearance:C3; Oil Limiting Speed:5700 rpm; Features:Open; Outside Diameter D:145.000 mm; Cr - Dynamic Load Rating:42.7 kN; Outside Ring Width B:16.000 mm;

Number of Bearings:Double; Type:Bearings with Housin; Bearing Retained:Yes (with retaining; Bearing Used:Deep Groove Ball Bea; Days to Ship:7 Days; Shape:Flanged Pilot Type; Flange Shape:Round Type; Width T(mm):35; Number of Bearings:Double; Bearing I.D. d(mm):20;

Surface Treatment:No; Accessory:No Cover; Seal:Nitrile; Bearing Inner Dia. Shape:Cylindrical Bore Set; Bearing Unit, Type:Pillow Type; Machining:No; Bearing Inner Dia. Shape:Cylindrical Bore Set; Accessory:No Cover; Basic Load Rating, Static Rating(N):23300; Rolling Element Material:Bearing Steel;