Rexroth Z2FS16-8-3X/S THROTTLE VALVE

G:R1/8"; L:118 mm; Designation of bearing:UC207-20G2L4; e:21 mm; A:36 mm; Designation of closed end cover:SCC207; C0:15.2 kN; s1:21.45 mm; N:14mm; Dz:80 mm;

ra max:0.2 mm; Da max:14.4 mm; d:8 mm; Dynamic load, C:1.61 kN; D:16 mm; Mass:0.003 kg; Static load, C0:0.72 kN; da min:9.6 mm; Brand:NTN; Fatigue limit load, Cu:0.03 kN;

L:171 mm; A1:22 mm; SW:4.76 mm; T max.:100 °C; L3:95 mm; H1:130 mm; T min.:-20 °C; N2:64 mm; N:35mm; A:64 mm;

n:165 mm; m:820 mm; h:340 mm; l:300 mm; h1:615 mm; d3:TR240x4; Eye bolt(s):M24; a:980 mm; d1:260 mm; u:48 mm;

A2:39.4 mm; d1:37.4 mm; T max.:200 °C; B1:30.9 mm; e:16 mm; Recommended tightening torque for set screw:5.5 Nm; Designation of bearing:ES205G2T20; A:27 mm; G:M6x1; A1:13 mm;

A1:39.5 mm; C:43.55 kN; G:M6x1; s1:27.8 mm; C0:29.2 kN; Designation of open end cover:SCOU211-34; J:170.5 mm; Designation of housing:PLE211N-; Weight:3.58 kg; Recommended tightening torque for set screw:16.8 Nm;

A1:37 mm; Designation of bearing:UC209G2L4; H1:20 mm; T max.:100 °C; H:54 mm; B:49.2 mm; H2:108 mm; S:19 mm; G:M6x1; d:45 mm;

Dz:95 mm; B:42.8 mm; Designation of housing:FLE209N-; S:21.4 mm; A2:58.9 mm; d:45 mm; H:180 mm; T max.:200 °C; Designation of closed end cover:SCCE209; C:31.85 kN;

Bearing Insert Material:Steel; Flinger Type:Rubberized; Flinger Material:Steel; Housing Type:4 Bolt Flange; Bearing Family:Setscrew Ball Bearin; Max Bearing Speed:4000 rpm; Expansion Type:Non-Expansion; Bearing Outer Ring Material:Steel; Grease Type:Unirex N2; Ring Size:Standard;

B:41.2 mm; C:31.85 kN; J:150 mm; A1:32 mm; Designation of bearing:US209-27G2T04; Designation of housing:PE209-; Weight:2.22 kg; N:14mm; C0:20.8 kN; A:48 mm;

Dynamic load, C:8.2 kN; Minimum Buy Quantity:N/A; Outside Diameter:1.378 Inch | 35 Mill; Weight / LBS:0.12125; Category:Single Row Ball Bear; Internal Special Features:No; Noun:Bearing; Category:Single Row Ball Bear; Enclosure Type:Non-Contact Seal; Fatigue limit load, Cu:0.16 kN;

C:31.85 kN; d:44.45 mm; N1:24 mm; Weight:2.07 kg; C0:20.8 kN; S:10.2 mm; Designation of bearing:US209-28G2; N:14mm; Recommended tightening torque for set screw:8 Nm; J:151.5 mm;

Bearing Series:207 Series; UPC:782476295035; Ball Grade:Class 10; Bearing Bore Shape:Round; Bearing Insert Material:Steel; Base to Center Height:Not Applicable; Ship Weight:3.9 LB; Bearing Family:D-Lock Ball Bearing; Bearing Inner Ring Material:Steel; Ball Bearing Housing Series:207 Series;

b:17.5 mm; Characteristic inner ring frequency, BPFI:10.37 Hz; Fatigue limit load, Cu:153 kN; Da max:323 mm; D1:298.1 mm; Dynamic load, C:1,990 kN; Number of lubrication holes:3; da min:207 mm; Max operating temperature, Tmax:200 °C; Y0:1.98;

e:15 mm; Weight:0.44 kg; A2:37.1 mm; C:9.55 kN; T max.:100 °C; Recommended tightening torque for set screw:3.7 Nm; Designation of housing:F203-; C0:4.78 kN; A:25.5 mm; N:12mm;